Interlogix Concord 4 REV J Installation Manual Manual de usuario descargar pdf (Pagina 95)

Chapter 3: Programming

Concord 4 Installation Manual 89

Set up schedules

Shortcut: 05XXY,

where XX is schedule

00 to 15 and Y is start

(0)/stop (1) Monday to

Sunday (2 to 8)

Default: 00:00

This menu lets you set up start/stop times for each day of the week.

Schedules used by one partition cannot be viewed or changed from a

different partition.

If you are programming schedules for your customer, be sure to record

the settings in the Concord 4 User Manual.

To set up a time schedule:

1. Press A or B until the display shows SET UP SCHEDULES.

2. Press # and the display shows SCHEDULE 00. If you want a

different schedule number, press A or B until the schedule number

appears.

3. Press # and the display shows START TIME hh:mm (current

setting).

4. Enter the starting time (00:00 to 23:59). The display flashes the

entered time. Press # and the display shows START TIME hh:mm

(new setting).

5. Press B and the display shows STOP TIME hh:mm (current

setting).

6. Enter the desired stop time (00:00 to 23:59). The display flashes the

entered time. Press # and the display shows STOP TIME hh:mm

(new setting).

7. Press B and the display shows MONDAY OFF/ON (current

setting). To select a different day, continue pressing B until the desired

day appears.

8. Press 1 (off) or 2 (on). The display flashes the entered selection.

Press # and the display shows the new setting for the selected day.

9. Repeat the process until all desired settings for each day are set.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 152 153

Sin comentarios

Interlogix Concord 4 REV J Installation Manual Manual de usuario Pagina 95