Interlogix Concord 4 REV J Installation Manual Manual de usuario descargar pdf (Pagina 79)

Chapter 3: Programming

Concord 4 Installation Manual 73

Accessory modules menu

The Accessory modules menu gives you access to the following menus:

Bus devices: Use these settings to read bus device unit numbers, assign bus

devices to a partition, and configure other features associated with a specific bus

device. (Most bus device settings do not have shortcut numbers).

SnapCards: Use these settings to set the configuration number for each

SnapCard output, assign SnapCard outputs to a partition, and name the

SnapCard outputs.

Accessory modules - bus device settings

Unit-ID

Shortcut: 10000 to

10015

Default: **** or None

This menu lets you identify all connected bus devices, view each unit

number, view the device ID number, and configure other settings based

on a specific device. This menu also lets you delete learned bus

devices.

To help identify bus devices, the 8-digit device ID number is also located

on a label on each SuperBus 2000 device.

To identify bus device unit and ID:

1. With the display showing BUS DEVICES, press #. The display

shows the bus unit number and the 8-digit device ID number. For

example: UNIT - ID 0—02110185. Where 0 is the unit number

and 02110185 is the device ID number.

2. Press A or B to identify all other bus unit numbers (0 to 15) and

device ID numbers.

To delete learned unit numbers:

1. With the display showing BUS DEVICES, press #. The display

shows the bus device set to unit number 0.

2. Press A or B until the bus device unit number you want to delete is

displayed.

3. Press D. The display changes the unit number to None.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 152 153

Sin comentarios

Interlogix Concord 4 REV J Installation Manual Manual de usuario Pagina 79