Interlogix Concord Express Installation Manual Manual de usuario descargar pdf (Pagina 59)

Chapter 2

Concord Express Installation Instructions 53

Swinger Limit (05014)

Reporting-Global (Default=1)

This setting determines the maximum number of

times a sensor or zone can go into alarm (during

a single arming period) before the panel

automatically bypasses that sensor or zone. This

feature only applies to sensors in groups 00-20,

29, or 34.

When set to 1, the panel automatically bypasses

a sensor or zone after it causes an alarm. When

set to 2, the panel waits until a sensor or zone

has caused a second alarm (during the same

arming period) before bypassing it. At either

setting, the automatic bypass is logged into the

event buffer.

A bypassed zone or sensor will be cleared

(automatically “unbypassed”) if the system

receives no further activations from that sensor

or zone over the next 48-50 hours.

Changing the arming level also clears all

automatically bypassed sensors and zones and

resets the Swinger Limit count on all sensors and

zones.

To set the Swinger Limit:

1. With the display showing SWINGER LIMIT

n (current setting), press 1 or 2. The display

flashes the entered setting.

2. Press # and the display shows the new

setting.

The following describes how to program the settings that appear under

REPORTING—PARTITION 1.

Opening Reports (0510)

Reporting-Partition 1 (Default=off)

This setting determines whether or not

the panel sends an opening report to the

central station (or pager) after disarming

the system.

Note: To use this feature, the

Open/Close Reports settings under the

PHONES—CS PHONE 1-2 and/or

PHONES—PAGER PHONE 1-3 menus

must be turned on for the specific CS

Phone or Pager Phone number.

To turn Opening Reports off or on:

1. With the display showing OPENING REPORTS

OFF/ON (current setting), press 1 (off) or 2 (on).

The display flashes the entered setting.

2. Press # and the display shows the new setting.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 116 117

Comentarios a estos manuales

Sin comentarios

Interlogix Concord Express Installation Manual Manual de usuario Pagina 59

Comentarios a estos manuales

Relacionado con productos y manuales para Panel De Control Interlogix Concord Express Installation Manual