Interlogix Concord Express Installation Manual Manual de usuario descargar pdf (Pagina 16)

Chapter 1

10 Concord Express Installation Instructions

Device

Max. wire length to panel

Wire type

SuperBus 2000 2x20

VFD Alphanumeric

Touchpad

22 AWG—250 ft.

18 AWG— 600 ft.

Stranded

SuperBus 2000 Hardwire

Input Module

22 AWG—1,800 ft.

18 AWG— 4,500 ft.

Stranded

Mounting the Panel

Use the following procedure to mount the panel to the wall or wall studs.

Caution: Make sure you are free of static electricity whenever you work on the

panel with the cover open. To discharge any static, first touch the metal panel

chassis, then stay in contact with the chassis when touching the circuit board.

Using an approved grounding strap is recommended.

To mount the panel cabinet and circuit board:

1. Open the panel door and slide it up to remove it from the cabinet. Set the

door aside.

2. Remove the knockout to provide access for system wiring (see Figure 2

below).

3. Feed all device wires through the knockout and place the panel in position

against the wall.

4. Level the panel and mark the top and bottom mounting holes (see Figure 2

below).

Figure 2: Mounting holes

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 116 117

Sin comentarios

Interlogix Concord Express Installation Manual Manual de usuario Pagina 16