Interlogix NVR 21 (S/P) User Manual Manual de usuario descargar pdf (Pagina 98)

Chapter 10: Recording

92 TruVision NVR 21(S/P) User Manual

3. In the Local HDD Settings screen, select Redundancy.

Verify at least one other HDD is set to R/W (read/write).

4. Click Apply to save the settings and then OK return to the previous screen.

5. In the menu toolbar, click the Video Schedule > Encoding.

6. Select the camera to be used for redundancy.

7. Under Redundant Record/Capture, select Yes from the drop-down list.

8. Click Apply to save the settings.

9. Repeat steps 6 to 8 for other cameras whose files you would like to be redundantly

recorded.

10. Click Back to return to live view.

Capturing text insertions

The recorder supports Point-of-Sale (POS) and ATM text insertion via the UTC

ProBridge accessory connected to the RS-232 port on the recorder.

The feature is currently only available via the browser (see “Capturing text insertions”

on page 80).

Failover and recovery

You can set up a spare recorder to act as a slave unit (hot spare) for up to four master

TVN 21(S/P) master units. This slave unit will continually monitor the master units and if

one of the master units should fail, it can then take over recording until the failed unit

comes back online. Once the failed unit is back operating normally again, the slave unit

will send its recordings to the HDDs of the recovered unit so that no recordings are

missing.

The hot spare unit can only backup one master unit at a time. If more than one unit

should fail, the hot spare unit will only backup the unit that failed first.

All units must have the same number of channels.

You can mix TVN 21 and TVN 21P units but you cannot include TVN 50s.

WARNING: Camera connected to the TVN 21S as PoE ports cannot be included in a

hot spare function.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 179 180

Sin comentarios

Interlogix NVR 21 (S/P) User Manual Manual de usuario Pagina 98