Interlogix NVR 21 (S/P) User Manual Manual de usuario descargar pdf (Pagina 40)

Chapter 5: Live view

34 TruVision NVR 21(S/P) User Manual

Sequencing live view mode using the front panel:

1. Select the camera where you want to start sequencing.

2. Press the Seq button on the front panel to start sequencing.

3. Press the Seq button again to stop the sequencing.

Sequencing live view mode using the mouse:

1. Select the camera where you want to start sequencing.

2. Right-click the mouse and select Start auto-switch to start the sequencing.

3. Right-click the mouse and select Stop auto-switch to stop the sequencing.

Accessing frequently used commands

The quick access toolbar in live view lets you quickly access regularly used commands.

Position the cursor over a video image and left-click the mouse. The toolbar appears

(see Figure 13 below).

Figure 13: Quick access toolbar

Table 10: Description of the quick access toolbar icons

Icon Description

Freeze: Freeze the live image of the selected camera.

Although the image pauses, time

and date information does not. The system clock continues to run.

Manual recording: Start/stop manual recording.

The icon is red when manual recording is enabled. See “Manual recording” on page 88

for information on setting up this function.

Instant playback: Playback the recorded video from the last five minutes (default time)

If no recording is found, then there was no recording made.

Click the icon and select the desired camera. Click OK.

See “Instant playback” on page 54 for information on programming this time.

Audio: Enable/Disable audio output. The audio option must already have been setup in

the Display menu.

Quick snapshot

: Capture a snapshot of a video image. The image is saved on the unit.

PTZ control: Enter PTZ control mode.

Digital zoom: Enter digital zoom. See “Digital zoom” below for further information.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 179 180

Sin comentarios

Interlogix NVR 21 (S/P) User Manual Manual de usuario Pagina 40