Interlogix NVR 21 (S/P) User Manual Manual de usuario descargar pdf (Pagina 122)

Chapter 13: Storage management

116 TruVision NVR 21(S/P) User Manual

Controlling disk storage mode on the HDD

You can allocate on an HDD the maximum permitted storage and snapshot capacities

from each camera.

1. Click System Settings > Hard Disk > Storage Mode.

2. Under the Mode option, select Quota.

3. Select a camera whose storage capacity you want to change and enter the values in

GB for maximum record capacity and maximum picture capacity. The Used

Record/Picture Capacity and the maximum storage capacity of the HDD are listed.

4. Click Apply to save the settings.

5. If you want to copy these values to other cameras, click Copy and select the

cameras. Click OK. Click Apply to save the settings.

Setting up HDD groups

Your recorder can organize multiple HDDs into groups. Videos from specified channels

can be set to be recorded onto a particular HDD group. You could, for example, save

the records from a couple of high priority cameras to one HDD, and save the recordings

from all the other cameras to another HDD.

To set up an HDD group:

1. From the menu toolbar, click System Settings > Hard Disk > Storage Mode.

2. Under Mode, select Group.

3. Under Record on HDD Group, select the HDD group number.

4. Check the channels to be added to this group.

Note: By default, all channels belong to HDD group 1.

5. Click Apply to save the settings.

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 179 180

Sin comentarios

Interlogix NVR 21 (S/P) User Manual Manual de usuario Pagina 122