Interlogix NVR 21 (S/P) User Manual Manual de usuario descargar pdf (Pagina 36)

Chapter 5: Live view

30 TruVision NVR 21(S/P) User Manual

Video output

The recorder can be connected to up to three monitors. However, only one monitor can

be controlled at a time.

The recorder automatically checks the monitor outputs used. If more than one monitor

is connected, it then defines which monitor is the main one and which is the auxiliary.

If a HDMI monitor is used, it will be the main output. If HDMI and VGA monitors are

both connected to the recorder, both will be main monitors; they will both show the

same view. However, you will not be able to control each individually.

To select the video output of the main monitor:

1. From the menu toolbar, click Display Mode Settings > Layout > General.

2. From Video Output Interface, select which monitor will be the main monitor: HDMI

(depends on recorder model), VGA, or main BNC. HDMI is default, if connected.

To control a monitor:

On the front panel press button A to select the main monitor. Press button B to

select the event monitor.

Monitor output

The decoding capabilities for the recorder in live view are:

• 1 × 1 main stream

• 2 × 2 main stream

• 1 main stream and 5 substreams

• 1 main stream and 7 substreams

• 3 × 3 substreams

• 4 × 4 substreams

The number of cameras that can be played back together depends on the camera

resolution. See Table 7 on page 31.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 179 180

Sin comentarios

Interlogix NVR 21 (S/P) User Manual Manual de usuario Pagina 36