Interlogix NS3702-24P-4S Command Line Guide Manual de usuario Pagina 24

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 405
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 23
-24-
Show the current IP Address
1. At the “#” prompt, enter “show ip interface brief”.
2. The screen displays the current IP address and Subnet Mask as shown in Figure 3-2.
Figure 3-2: IP Information Screen
Configuring IP Address
3. At the “#” prompt, enter the following command and press <Enter>. As shown in Figure 3-3.
# configure terminal
(config)# interface vlan 1
(config-if-vlan)# ip address 192.168.1.100 255.255.255.0
The previous command would apply the following settings for the Managed Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Figure 3-3: Configuring IP Address Screen
Vista de pagina 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 404 405

Comentarios a estos manuales

Sin comentarios