Interlogix Concord 4 User Manual Manual de usuario descargar pdf (Pagina 54)

52 Concord 4 User Manual

Detail screen display Source

S06 Auto stay arming

S07 Automation module

S08 Keyswitch arming zone

S09 System

S1xx (xx = zone number) Keychain touchpad

S2xx (xx = zone number) Wireless touchpad

S3xx (xx = bus unit number) Alphanumeric touchpad

S6xx (xx = bus unit number) Fixed display touchpad

Touchtone phone

Your system may be equipped with an option that allows system operation from a

touchtone phone, on or off the premises. This option enables programmed text to

be spoken through the phone and/or broadcast through interior speakers. Except

for custom word, the voice speaks the text that appears on alphanumeric

touchpads in the system.

Phone command prefix

What distinguishes a call to the panel from any other outgoing or incoming call is

the use of the phone command prefix:

• In the case of onsite operation, if the phone command prefix is dialed first

(within 5 seconds of picking up the phone), the panel waits for a valid access

code or command.

• If the system is being accessed remotely, the phone commands prefix is used

in conjunction with the access code.

The prefix is usually #, but can be changed to * by the installer. If your prefix has

been changed, use * as the first key you press instead of #.

Accessing the system from offsite

To access the system from offsite, the system needs to recognize two things

about the call:

• The panel needs to recognize that it should answer the phone.

• The panel needs to recognize that the code entered has the authority to

operate the system from offsite.

When using a cellular phone to operate the system, follow the offsite operating

instructions.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 87 88

Sin comentarios

Interlogix Concord 4 User Manual Manual de usuario Pagina 54