Interlogix TruVision IP Camera Configuration Manual Manual de usuario descargar pdf (Pagina 42)

3BChapter 4: Camera management

38 TruVision IP Camera Configuration Manual

2. Select the Authentication type Enable or Disable in the drop-down list to

enable or disable the RTSP authentication.

3. Click Save to save the changes.

Note: If "RTSP Authentication" is disabled, although the user has no permission

for “Remote: Live View", he can still see the live view images.

IP address filter

This function makes it possible for access control.

To define IP Address Filter:

1. In the Configuration folder, select the Security tab.

2. Select the IP Address Filter tab.

3. Check the checkbox of Enable IP Address Filter.

4. Select the type of IP Address Filter in the drop-down list, Forbidden and

Allowed are selectable.

5. Click Add to add an IP address.

6. Click Modify or Delete to modify or delete the selected IP address.

7. Click Clear to delete all the IP addrsses.

8. Click Save to save the changes.

Telnet

To define Telnet:

1. In the Configuration folder, select the Security tab.

2. Select the Telnet tab.

3. Check the checkbox of Enable Telnet.

4. Click Save to save the changes.

Restore default settings

Use the Default menu to restore default settings to the camera. There are two

options available:

 Restore: Restore all the parameters, except the IP parameters, to the default

settings.

 Default: Restore all the parameters to the default settings.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 53 54

Sin comentarios

Interlogix TruVision IP Camera Configuration Manual Manual de usuario Pagina 42