Interlogix TruVision IP Camera Configuration Manual Manual de usuario descargar pdf (Pagina 23)

2BChapter 3: Camera configuration

TruVision IP Camera Configuration Manual 19

Figure 6: Camera image settings menu

Table 6: Image parameters

No.

Parameter

Description

Brightness

, Contrast

aturation, Hue, Sharpness

Modifies the different elements of picture quality by adjusting

the position of the values for each of parameter.

Exposure Time

The exposure time controls the length of time that the

aperture is open to let light into the camera through the lens.

Select a higher value if the image is dark

and a lower value to

see fast moving object.

Iris Mode

There are two settings, Auto and Manual. The type of lens

determines which setting is used.

Video Standard

The camera cannot auto-sense the power supply.

Select 50 Hz (PAL) or 60 Hz (NTSC) depending on your

region.

Day/Night

Switch Defines whether the camera is in day or night mode. The day

(color) option could be used, for example, if the camera is

located indoors where light levels are always good.

Options:

Day: Camera is always in day mode.

Night: Camera is always in night mode.

Auto: The camera automatically detects which mode to use.

Default is Auto.

Sensitivity

Adjusts the sensitivity of the camera from night to day.

Options: Low, Normal, or High. Default is Normal.

Switch Time

Adjusts the delay time of day/night switch.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 53 54

Sin comentarios

Interlogix TruVision IP Camera Configuration Manual Manual de usuario Pagina 23