Interlogix TruVision IP Camera Configuration Manual Manual de usuario descargar pdf (Pagina 17)

2BChapter 3: Camera configuration

TruVision IP Camera Configuration Manual 13

Network settings

Accessing the camera through a network requires that you define certain network

settings. Use the “Network” folder to define the network settings. See Figure 4

and Table 4 below for further information.

Figure 4: Network window (TCP/IP tab shown)

Table 4: Network parameters

No.

Parameters

Description

TCP/IP

NIC Type: Specifies the NIC type. Default is Auto. Other options include:

10M Half-dup, 10M Full-dup, 100M Half-dup and 100M Full-dup.

DHCP: Enable to automatically obtain an IP address and other network

settings from that server.

IPv4 Address: Specifies the IPv4 address of the camera.

IPv4 Subnet Mask: Specifies the IPv4 subnet mask.

IPv4 Default Gateway: Specifies the IPv4 gateway IP address.

IPv6 Mode: Specifies the IPv6 mode, including Manual, DHCP and

Router Advertisement.

IPv6 Address: Specifies the IPv6 address of the camera.

IPv6 Subnet Prefix Length: Specifies the IPv6 prefix length.

IPv6 Default Gateway: Specifies the IPv6 gateway IP address.

Mac Address: Set to 00:4d:c1:33:11:d4.

MTU: Specifies the valid value range of MTU. Default is 1500.

Multicast Address: Specifies a D-class IP address between 224.0.0.0 to

239.255.255.255. Only specify this option if you are using the multicast

function. Some routers prohibit the use of multicast function in case of a

network storm.

DNS server: Specifies the DNS server for your network.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 53 54

Sin comentarios

Interlogix TruVision IP Camera Configuration Manual Manual de usuario Pagina 17