Interlogix Topaz User Manual Manual de usuario descargar pdf (Pagina 201)

100

101

Chapter 8

Setup

183

Mag Stripe Card Formats

Unlike a Wiegand Card Format, which cannot be changed for a given card, Mag Stripe Cards can

have their data changed. However, this requires the use of special equipment, which may or may not

have been part of your site’s installation of Topaz.

Whereas Wiegand cards are formatted in bits, Mag Stripe cards are formatted in digits (0 through 9).

To add a Mag Stripe Card Format:

1. Select the Card Length.

2. Select the Start value and Length for the Company Code, Facility Code, Issue Code, and the

Card Number.

3. Most cards do not use a Field Separator. It is most commonly used when compatibility is

required with Time and Attendance programs and other systems. When you select a Field

Separator, Topaz uses the letter D. If you want to use a Field Separator, click the box to the

right of the field. Topaz ignores the Field Separator digit in counting where data fields start.

See the example below.

Issue Code 2 0

Table 10. Example of a 34-bit Wiegand Card Format with no parity (Honeywell Standard)

Field Start Length

Company Code 2 0

Facility Code 2 16

Card Number 18 16

Issue Code 2 0

Table 11. Example of a 35-bit Wiegand Card Format with no parity (HID Corporate 1000)

Field Start Length

Company Code 3 12

Facility Code 2 0

Card Number 15 20

Issue Code 2 0

Table 12. Example of a 37-bit Wiegand Card Format with a company code and a facility code

Field Start Length

Company Code 5 10

Facility Code 15 6

Card Number 21 16

Issue Code 2 0

Table 9. Example of a 26-bit Wiegand Card Format with a company but no facility code

Field Start Length

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 419 420

Comentarios a estos manuales

Sin comentarios

Interlogix Topaz User Manual Manual de usuario Pagina 201

Comentarios a estos manuales

Relacionado con productos y manuales para Software Interlogix Topaz User Manual