Interlogix NVR 50 User Manual Manual de usuario descargar pdf (Pagina 42)

4BChapter 5: Live view

36 TruVision NVR 50 User Manual

Note: “X” means that the camera is not displayed.

7. Click Apply to save the settings.

8. Click Back to return to live view.

General settings

Use this screen to configure the monitor image, GUI language, login password

requirement, monitor resolution as well as to configure the NVR name and

address. See Figure 17 below.

The TVN 50 can support NTSC or PAL video output. The video format is auto

detected.

The changes are immediately implemented once Apply is clicked to save the

settings.

Figure 17: Monitor setup screen: General Settings

Table 11: Description of the Monitor setup screen: General Settings

Option

Description

Language

Change the language of the system.

Select the desired language from the drop-down list and click

Apply. The language displayed changes immediately.

Device name

Define the NVR name. The default name is TVN50.

Click the edit box and enter the new name from the soft keyboard.

Device address

The device number to use for the NVR when programming the

remote control or keypad. The default value is 255.

Zone ID

Each TVN in a daisy chain must have a unique zone ID so that it

can be controlled by a KTD-405.

The default value is 1.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 176 177

Sin comentarios

Interlogix NVR 50 User Manual Manual de usuario Pagina 42