Interlogix NVR 50 User Manual Manual de usuario descargar pdf (Pagina 34)

4BChapter 5: Live view

28 TruVision NVR 50 User Manual

The NVR automatically checks the monitor outputs used. If more than one

monitor is connected, the system then defines which monitor is the main one and

which is the event one. The event monitor is used to display detected events

such as motion. It cannot be configured separately.

The priority level for the main output is HDMI > VGA > CVBS. See Table 6

below. However, you can manually define your main monitor from the Layout

menu.

Table 6: Monitor output priority level

Monitor output in use Priority level

HDMI VGA CVBS Main monitor



HDMI



VGA



CVBS



HDMI

To select the video output of the main monitor:

1. Click the Display Mode Settings icon in the menu toolbar.

2. Select Layout > General.

3. From Video Output Interface, select which monitor will be the main monitor:

HDMI (depends on NVR model), VGA, main CVBS, or spot output. HDMI is

default, if connected.

To control a monitor:

On the front panel press button A to select the main monitor. Press button B

to select the event monitor.

Audio output

The HDMI monitor connector on the back panel outputs both video and audio

signals. There is an audio output on the back panel for speakers.

Controlling live view mode

Many features of the live view mode can be quickly accessed by placing the

cursor on a live image and clicking the right-button of the mouse. The mouse

menu appears (see Figure 11 on page 29).

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 176 177

Sin comentarios

Interlogix NVR 50 User Manual Manual de usuario Pagina 34