Interlogix DVR 60 User Manual Manual de usuario descargar pdf (Pagina 96)

11BChapter 12: Configuring alarm settings

90 TruVision DVR 60 User Manual

To set up motion detection:

1. Enter the Camera Management screen by selecting Camera in the main

menu. The Camera Management screen appears.

2. Select one or more cameras for which you want to configure motion

detection, and then click Setup to display the Camera Settings screen.

3. Click the Advanced tab to display the Advanced Camera Settings screen.

4. Check the Motion Detection box to enable motion detection. The Area Setup

button is activated.

5. Select the areas sensitive to motion.

Click Area Setup to enter the motion detection area setup interface.

Note: This option is only available for analog cameras. The button is inactive

for IP cameras.

The motion detection area setup interface appears. It lets you define areas

where you want motion to be detected. By default to whole screen is selected

and appears as a red grid (295 squares). Click and drag an area to deselect

that area for motion detection. Areas covered by the red grid are sensitive to

motion detection.

Right-click the mouse and click Sensitivity from the pop-up menu to set the

motion detection sensitivity. A higher value indicates higher sensitivity and

vice versa. Click OK to accept and return to the motion detection area setup

interface.

Again right-click the mouse and click Target Size to specify how many grid

squares must be activated before motion is detected. Enter a value between

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 163 164

Sin comentarios

Interlogix DVR 60 User Manual Manual de usuario Pagina 96