Interlogix DVR 60 User Manual Manual de usuario descargar pdf (Pagina 26)

2BChapter 3: Getting started

20 TruVision DVR 60 User Manual

Any changes you make to a setup configuration screen are saved when you exit

the screen and return to the main eZ Setup screen.

Note: The TVR 60 firmware supports over 16 languages.

Figure 8: Setup Wizard screen

To quickly set up the TVR 60:

1. Connect all the devices required to the rear panel of the TVR 60. See

Figure 1 on page 7.

2. Turn on the unit using the power switch on the rear panel. After the boot up

screen, the TVR 60 displays video images on-screen.

3. Select the preferred language for the system.

4. In the eZ Setup screen, click Next. The User Permission screen appears.

5. Administrator configuration:

Navigate to the Admin Password edit box and click the edit box with the

mouse, or press Enter on the front panel or remote control, to display the

virtual keyboard. Enter the default admin password, 1234.

Note: You must enter an admin password.

Caution: It is strongly recommended that you change the password of the

administrator. Do not leave 1234 as the default password. Write it down in a

safe place so that you do not forget it.

Click Next. You are then asked if you want to enter the HDD Management

screen.

6. HDD management:

Click Enter to open the HDD Management screen and configure your HDD

settings as required.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 163 164

Sin comentarios

Interlogix DVR 60 User Manual Manual de usuario Pagina 26