Interlogix NS3550-8T-2S User Manual Manual de usuario Pagina 114
- Pagina / 495
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
114
4.6.10.2 VLAN Trunking between two 802.1Q aware Switch
In most cases, it is used for “Uplink” to other switches. VLANs are separated at different switches, but they need to access with
other switches within the same VLAN group. The screen in Figure 4-6-11 appears.
Setup steps
1. Create VLAN Group
Set VLAN Group 1 = Default-VLAN with VID (VLAN ID) =1
Add two VLANs – VLAN 2 and VLAN 3
VLAN Group 2 with VID=2
VLAN Group 3 with VID=3
2. Assign VLAN Member :
VLAN 2 : Port-1,Port-2 and Port-3
VLAN 3 : Port-4, Port-5 and Port-6
VLAN 1 : All other ports – Port-7~Port-24
As to the VLAN ports connecting to the hosts, please refer to 4.6.10.1 examples. The following steps will focus on the VLAN
Trunk port configuration.
1. Specify Port-8 to be the 802.1Q VLAN Trunk port.
2. Assign Port-8 to both VLAN 2 and VLAN 3 at the VLAN Member configuration page.
3. Define a VLAN 1 as a “Public Area” that overlaps with both VLAN 2 members and VLAN 3 members.
4. Assign the VLAN Trunk Port to be the member of each VLAN, which wants to be aggregated. For this sample, assign
Port-8 to be VLAN 2 and VLAN 3 member port. The screen in Figure 4-6-12 appears.
Figure 4-6-12: VLAN overlap port setting & VLAN 1 – The Public Area Member Assign
- IFS NS3550-8T-2S 1
- User Manual 1
- TABLE OF CONTENTS 3
- 1. INTRODUCTION 15
- 1.2 Product Description 16
- 1.3 How to Use This Manual 17
- 1.4 Product Features 18
- 1.5 Product Specifications 21
- 2. INSTALLATION 23
- 2.1.2 Front Panel 24
- 2.1.3 LED Indicators 25
- 2.1.4 Switch Upper Panel 26
- 2.2.1 Installation Steps 27
- 2.2.2 DIN-Rail Mounting 28
- 2.3 Wiring the Power Inputs 31
- 2.5 Cabling 31
- 2.5.2 Removing the Module 34
- 3. SWITCH MANAGEMENT 36
- 3.3 Remote Telnet 38
- 3.4 Web Management 39
- 4. WEB CONFIGURATION 41
- 4.1 Main Web Page 44
- 4.2 System 46
- 4.2.1 System Information 47
- 4.2.2 IP Configuration 47
- 4.2.3 IPv6 Configuration 48
- 4.2.4 Users Configuration 49
- Add / Edit User 50
- 4.2.5 Privilege Levels 51
- 4.2.6 NTP Configuration 54
- 4.2.7 UPnP 54
- 4.2.8 DHCP Relay 56
- 4.2.9 DHCP Relay Statistics 57
- 4.2.10 CPU Load 59
- 4.2.11 System Log 60
- 4.2.12 Detailed Log 60
- 4.2.13 Remote Syslog 62
- 4.2.14 SMTP Configuration 63
- 4.2.15 EEE Power Reduction 64
- 4.2.16 Web Firmware Upgrade 65
- 4.2.17 TFTP Firmware Upgrade 65
- 4.2.18 Configuration Backup 66
- 4.2.19 Configuration Upload 68
- 4.2.20 Image Select 69
- 4.2.21 Factory Default 71
- 4.2.22 System Reboot 72
- 4.2.23 Daylight Saving 73
- 4.3.1 SNMP Overview 75
- 4.3.4 SNMPv3 Configuration 79
- 4.4 Port Management 83
- 4.4.3 Port Statistics Detail 86
- 4.4.4 SFP Information 87
- 1000Base-SX 88
- 1000Base-LX 88
- 100Base-FX 88
- 4.4.5 Port Mirror 89
- Mirror Port Configuration 90
- 4.5 Link Aggregation 91
- 4.5.1 Static Aggregation 92
- 4.5.2 LACP Configuration 94
- 4.5.3 LACP System Status 95
- 4.5.4 LACP Port Status 95
- 4.5.5 LACP Port Statistics 96
- 4.6 VLAN 98
- 4.6.3 VLAN Basic Information 100
- 4.6.5 VLAN Membership 105
- 4.6.6 VLAN Membership Status 106
- 4.6.7 VLAN Port Status 107
- 4.6.8 Private VLAN 107
- 4.6.9 Port Isolation 109
- 4.6.10 VLAN setting example: 111
- 4.6.11 MAC-based VLAN 116
- 4.6.12 MAC-based VLAN Status 118
- 4.6.13 Protocol-based VLAN 119
- : Click to save changes 120
- Auto-refresh 120
- 4.7 Spanning Tree Protocol 121
- 4.7.3 Bridge Status 128
- * means to select all ports 130
- * means all MSTI items will 133
- 4.7.6 MSTI Configuration 134
- Configuration Identification 135
- MSTI Mapping 135
- MSTI Port Configuration 136
- MSTx MSTI Port Configuration 136
- 4.7.8 Port Status 137
- 4.7.9 Port Statistics 138
- 4.8 Multicast 139
- Type Response Time 141
- 4.8.5 IGMP Snooping Status 147
- 4.8.6 IGMP Group Information 147
- 4.8.7 IGMPv3 Information 149
- 4.8.11 MLD Snooping Status 153
- 4.8.13 MLDv2 Information 155
- 4.8.14 MVR 155
- 4.8.15 MVR Status 157
- 4.8.17 MVR SFM Information 159
- 4.9 Quality of Service 160
- * means selection all 161
- 4.9.3 Port Classification 162
- 4-9-3 appears 163
- 4.9.4 Port Scheduler 164
- 4.9.5 Port Shaping 164
- 4.9.6 Port Tag Remarking 167
- 4.9.8 DSCP-Based QoS 171
- 4.9.9 DSCP Translation 172
- 4.9.10 DSCP Classification 174
- 4.9.11 QoS Control List 174
- 4.9.12 QoS Status 177
- 4.9.14 QoS Statistics 180
- 4.10 Access Control Lists 183
- 4.10.3 ACE Configuration 187
- MAC Parameters 189
- VLAN Parameters 189
- ARP Parameters 189
- IP Parameters 190
- Ethernet Type Parameters 192
- 4.11 Authentication 196
- MAC-based Auth 205
- Port State 213
- 4.11.7 RADIUS Overview 216
- 4.11.8 RADIUS Details 218
- RADIUS Accounting Servers 221
- Figure 4-11-21 230
- 4.12 Security 231
- 4.12.2 Access Management 234
- 4.12.4 HTTPs 236
- 4.12.5 SSH 237
- 4.12.6 Port Security Status 238
- 4.12.7 Port Security Detail 240
- 4.12.8 DHCP Snooping 240
- 4.12.12 ARP Inspection 246
- 4.13 MAC Address Table 248
- Dynamic MAC Table 250
- Navigating the MAC Table 250
- 4.14 LLDP 253
- 4.14.2 LLDP Configuration 254
- Civic Address Location 258
- Port Policies Configuration 260
- 4.14.4 LLDP-MED Neighbor 262
- 4.14.5 Neighbor 264
- 4.14.6 Port Statistics 266
- Local Counters 267
- 4.15 Diagnostics 269
- 4.15.1 Ping 270
- 4.15.2 IPv6 Ping 271
- 4.15.3 Remote IP Ping Test 272
- 4.15.4 Cable Diagnostics 272
- 4.16 Loop Protection 274
- 4.16.2 Status 275
- 4.17 RMON 276
- 4.17.2 RMON Alarm Details 277
- 4.17.3 RMON Alarm Status 278
- 4.17.5 RMON Event Details 280
- 4.17.6 RMON Event Status 281
- 4.17.8 RMON History Details 283
- 4.17.9 RMON History Status 284
- 4.18 Precision Time Protocol 289
- 4.18.2 PTP Status 291
- 4.19 Ring 292
- 4.19.5 Ring Wizard 301
- 4.19.6 Ring Wizard Example: 302
- 5. COMMAND LINE INTERFACE 304
- 6. COMMAND LINE MODE 305
- 6.1 System Command 306
- System Timezone 310
- Example: 310
- System Log Lookup 310
- 6.2 IP Command 311
- Default Setting: 316
- 6.7 Security Command 335
- Security Network ACL Delete 371
- Security AAA Timeout 381
- STP MSTI Port Configuration 394
- 6.9 Link Aggregation Command 395
- Aggregation Lookup 397
- Aggregation Mode 397
- 6.11 LLDP Command 401
- 6.12 LLDPMED Command 404
- LLDPMED Fast 408
- LLDPMED Info 408
- 6.13 EEE Command 409
- 6.14 Thermal Command 410
- QoS Port DSCP Translation 420
- QoS Storm Multicast 424
- QoS QCL Add 424
- QoS QCL Status 426
- QoS QCL Refresh 427
- 6.16 Mirror Command 428
- 6.17 Configuration Command 429
- 6.18 Firmware Command 430
- 6.19 UPnP Command 430
- 6.20 MVR Command 432
- 6.21 Voice VLAN Command 435
- 6.22 Loop Protect Command 441
- Loop Protect Transmit 442
- Loop Protect Shutdown 442
- 6.23 IPMC Command 443
- 6.25 SMTP Command 452
- SMTP Auth_user 454
- SMTP Auth_pass 454
- SMTP Mailfrom 454
- 6.30 PTP Command 471
- PTP OnePpsAction 477
- 7. SWITCH OPERATION 478
- 7.5 Auto-Negotiation 479
- 8. TROUBLE SHOOTING 480
- APPENDEX A 482
- 12345678 483
- APPENDEX B : GLOSSARY 484
Relacionado con productos y manuales para Accesorios de comunicación Interlogix NS3550-8T-2S User Manual
(631 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.087 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales