Interlogix NS3502-8P-2S User Manual Manual de usuario Pagina 85

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 568
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 84
IFS NS3502-8P-2S User Manual
85
SNMP v2c: Set SNMP trap supported version 2c.
SNMP v3: Set SNMP trap supported version 3.
Trap Community
Indicates the community access string when send SNMP trap
packet. The allowed string length is 0 to 255, and the allowed
content is the ASCII characters from 33 to 126.
Trap Destination
Address
Indicates the SNMP trap destination address.
Trap Destination
IPv6 Address
Provide the trap destination IPv6 address of this switch. IPv6
address is in 128-bit records represented as eight fields of up to
four hexadecimal digits with a colon separate each field (:). For
example, ‘fae0::013:4fefe:dea4:34d4’. The symbol '::' is a special
syntax that can be used as a shorthand way of representing
multiple 16-bit groups of contiguous zeros; but it can only appear
once. It also used a following legally IPv4 address. For example,
'::192.1.2.34'.
Trap
Authentication
Failure
Indicates the SNMP entity is permitted to generate
authentication failure traps. Possible modes are:
Enabled: Enable SNMP trap authentication failure.
Disabled: Disable SNMP trap authentication failure.
Trap Link-up and
Link-down
Indicates the SNMP trap link-up and link-down mode operation.
Possible modes are:
Enabled: Enable SNMP trap link-up and link-down mode
operation.
Disabled: Disable SNMP trap link-up and link-down mode
operation.
Trap Inform Mode
Indicates the SNMP trap inform mode operation. Possible modes
are:
Enabled: Enable SNMP trap inform mode operation.
Disabled: Disable SNMP trap inform mode operation.
Trap Inform
Timeout (seconds)
Indicates the SNMP trap inform timeout. The allowed range is 0
to 2147.
Trap Inform Retry
Times
Indicates the SNMP trap informs retry times. The allowed range is
0 to 255.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
Vista de pagina 84
1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 567 568

Comentarios a estos manuales

Sin comentarios