Interlogix TruVision IP Open Standards Box User Manual Manual de usuario descargar pdf (Pagina 35)

3BChapter 4: Configuring the camera

5. If you selected “All day recording”, select one of the record types to record

from the drop-down list box:

• Schedule recording. This is continuous recording.

• Motion detection

• Alarm record

• Motion or alarm

• Motion and alarm

- Or -

If you selected “Section recording”, in the left column click the day of the week

required and then set the start and end times for each section (time period)

during which you want the camera to begin and end recording. Up to four time

periods can be selected.

From the drop-down list box select one of the record types to record for each

time period.

Note: The four time periods cannot overlap.

6. Set the recording periods for the other days of the week, if required.

Use the Copy to option to copy the recording periods to another day of the

week.

7. Click Save to save changes.

Notes

• The camera will prompt you to reboot in order for the schedule to take effect.

• If you set the record type to “Motion detection” or other related alarm types,

you must also define the motion detection alarm in order to trigger motion

recording. See “Motion detection alarms” below for more information.

Motion detection alarms

You can define motion detection alarms. A motion detection alarm refers to an

alarm triggered when the camera detects motion. However, the motion alarm is

only triggered if it occurs during a programmed time schedule.

TruVision IP Ca

m Open-Standards User Manual 31

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 63 64

Sin comentarios

Interlogix TruVision IP Open Standards Box User Manual Manual de usuario Pagina 35