Interlogix TruVision 360° Configuration Manual Manual de usuario descargar pdf (Pagina 12)

10 TruVision 360° Camera Configuration Manual

2. From the Time Zone drop-down menu, select the time zone that is the closest to the

camera’s location.

3. Under Time Sync, check one of the options for setting the time and date:

Synchronize with an NTP server: Check the NTP enable box and enter the server

NTP address. The time interval can be set from 1 to 10080 minutes.

- Or -

Set manually: Enable the Manual Time Sync function and then click to set the

system time from the pop-up calendar.

Note: You can also check the Sync with computer time checkbox to synchronize

the time of the camera with the time of your computer.

4. Check Enable DST to enable the DST function, and set the start and end dates of

the DST period.

5. Click Save to save changes.

Defining RS-485 settings

The RS-485 serial port is used to control extra devices that support the 485 protocol

(Pelco D or Pelco P), such as PTZ devices, lighting devices or other devices. You can

also connect it to an analog PTZ camera, using a 360° camera to control PTZ

movement.

You need to configure these parameters before connecting the camera to any devices.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 49 50

Sin comentarios

Interlogix TruVision 360° Configuration Manual Manual de usuario Pagina 12