Interlogix 5820A Series Manual de usuario

Busca en linea o descarga Manual de usuario para Sensores Interlogix 5820A Series. Interlogix 5820A Series User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 4
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Description Model No. Color Listing
ShatterPro
II EZ, tamper, latch or non-latch LED 5812EZ-W White UL
ShatterPro
II EZ, tamper, Form C, latch or non-latch LED 5815EZ-W White ULC
ShatterPro
II, tamper, latch or non-latch LED 5812A-W White UL
ShatterPro
II, tamper, Form C, latch or non-latch LED 5815A-W White ULC
Recessed ShatterPro
II, latch or non-latch LED 5820A-W White
Recessed ShatterPro
II, tamper, latch or non-latch LED 5822A-W White UL
Single Gang Box ShatterPro
II 5825A-W White
Single Gang Box Kit for Recessed ShatterPro
II 5829A-W White
Hand-held Tester, for testing effective range 5709C-W White
SENTROL
ShatterPro
II Advanced Acoustic Sensor with Pattern Recognition Technology
Protected under U.S. Patent 5,192,931 and 5,510,767
Installation Instructions for Recessed and Surface Mount Models
WIRING
+
N.C.
COM
TAMP
TAMP
spring clip for
latching LED
Strip back the outer jacket on your wiring cable. This will allow wires to flex in the case. Make sure the cable is slack in the wall to
avoid stressing the wires at their connections.
5812EZ-W
5812A-W
5820A-W and 5822A-W
NOTE: When wiring the
5822A, the tamper is in series
with the alarm loop. There is
insufficient room for a separate
set of terminals for the tamper.
Surface Mount ShatterPro™ II
5812EZ
SENTROL
Surface Mount ShatterPro™ II 5812A
Recessed ShatterPro™ II 5820A
spring clip for
latching LED
+
N.C.
COM
TAMP
TAMP
NO
5815EZ-W
5815A-W
+
Loop
Cut for latching LED
ORDERING INFORMATION
Vista de pagina 0
1 2 3 4

Indice de contenidos

Pagina 1 - ShatterPro

Description Model No. Color ListingShatterPro™ II EZ, tamper, latch or non-latch LED 5812EZ-W White ULShatterPro™ II EZ, tamper, Form C, latch or non-

Pagina 2 - TESTING THE SENSOR

RANGE OF COVERAGETESTING THE SENSORPut Sensor in Test Mode1. Connect 9-volt battery to sensor for pre-testing.2. Use double-stick tape provided to tem

Pagina 3 - AVOIDING FALSE ALARMS

MOUNTINGLocate sensor at least 4' from noise sources (TVs, speakers, sinks,doors, etc.), and at least 3.3' away from nearest point of glass

Pagina 4 - ACCESSORIES

U.S. & Canada: 800.547.2556Technical Service: 800.648.7424FaxBack: 800.483.2495CORPORATE HEADQUARTERSSENTROLElectricalVoltage .....

Comentarios a estos manuales

Sin comentarios