Interlogix 5422 Manual de usuario descargar pdf (Pagina 2)

STEP 3 - TESTING

NOTE: Be sure to test the sensor at least annually to ensure

proper operation.

To verify sensor operation, lightly scrape the metal shaft of a

screwdriver (8" or larger) back and forth against the metal edge of

the enclosure (see Figure 3). The LED should light. Do not use the

side with sensor to test as it will be most sensitive. If the sensor

range is not sufficient, add another sensor (see Figure 4).

Figure 3. Vibration test

Figure 4. Two sensor placement

Sensor

Screwdriver

Sensor

DIMENSIONS

3.46"

8.8 cm

0.84"

2.1 cm

1.10"

2.8 cm

SPECIFICATIONS

ALL MODELS

Resistance: Normal ............................................................................................................................... <15 ohms (closed)

Alarm .......................................................................................................................... >1.0 megaohms (open)

Time Open on Alarm ........................................................................................................................................... 2-6 seconds

Operational Voltage (5422) ...................................................................................................................................... 9-24 VDC

Current Draw (5422) .....................................................................................................................................15 mA maximum

Number of Leads...................................................................................................................................... 2 (5402) or 4 (5422)

Maximium Loop Rating................................................................................................................................... 24 VDC, 50 mA

Wire Lead Size.................................................................................................................................................... 16-22 gauge

Mounting .................................................................................................................................................................. Tape pad

Dimensions ................................................................................................................................... 3.46" L x 1.1" W x 0.84" H

(8.8 cm x 2.8 cm x 2.1 cm)

ORDERING INFORMATION

G-3763-0499

1030900 Rev A

Model Description Loop Color Listing

Number Configuration

5402-W Lithium battery, 2-wire Closed loop, NC Grey UL/ULC

5422-W External power, 4-wire Closed loop, NC Grey UL/ULC