Interlogix Simon XTi GSM Module V4 Manual de usuario descargar pdf

P/N 466-2461 • REV H • 29JUL13 1

Simon XT/XTi GSM Module V4 Installation

Instructions

Content

Contact information#1

Introduction#1

Compatibility#1

Account creation#1

Installation#2

Power up#3

GSM phone test (module registration)#3

Control panel settings that change automatically with

HSPA 3G module#3

Troubleshooting: Module Status Information#3

Troubleshooting: LEDs#4

LED patterns for the various module states (modes)#6

Improving wireless signal strength#6

Interactive menus#6

Walking customer through new user setup on the web#9

Specifications#10

Regulatory information#10

Contact information

www.utcfireandsecurity.com or www.interlogix.com

For customer support, see www.interlogix.com/customer-

support

Interlogix is part of UTC Climate Controls & Security, a unit of

For additional information and support on Alarm.com products

and services, please visit www.alarm.com/dealer or contact

Alarm.com technical support at 1-866-834-0470.

Introduction

The HSPA 3G module (part numbers 600-1048-XT-ZX-TM ,

600-1048-XT-ZX-AT AND 600-1048-XT-ZX-RG) for Simon XT

and XTi enables wireless reporting of all alarms and other

system events from the Simon XT and XTi control panels using

an all-digital, HSPA wireless (cellular) network. The module

can be used as the primary communication path for all alarm

signaling, or as a backup to a telephone line connection to the

central monitoring station. The wireless alarm signaling and

routing service is operated by Alarm.com. The V4 module also

features integrated support for Alarm.com’s emPower

solution with built-in Z-Wave capabilities.

The module interfaces with the Simon XT and XTi panel

boards, fits into a special compartment inside the panel, and is

Compatibility

The V4 module with firmware version 151 & up is compatible

with Simon XT and XTi panels. Older versions of the

Alarm.com module, including versions of the V4 module with

previous firmware versions are not compatible with the Simon

XTi.

Account creation

Before installing an Alarm.com HSPA 3G Module in a Simon

XT or XTi system, a new customer account needs to be

created with Alarm.com. We recommend creating the account

at least 24 hours in advance of installation to ensure that the

radio is activated prior to installation.

To activate an account go to www.alarm.com/dealer and login.

Under the “Customers” heading at the top left of the page click

on “Create New Customer”. You will need the following

customer information to create the account:

• Customer Name

• Customer Address

• Customer Phone Number

• Customer E-mail

• Preferred login name for the customer

• Alarm.com Radio Serial Number

At the end of the account creation process you will be able to

print a Welcome Letter for the customer that has their login

information and temporary password for the Alarm.com

website.

1 2 3 4 5 6 7 8 9 10

Indice de contenidos

Pagina 1 - Instructions

P/N 466-2461 • REV H • 29JUL13 1 Simon XT/XTi GSM Module V4 Installation Instructions Content Contact information#1 Introduction#1 Compatibility#1

Pagina 2 - Installation

10 Simon XT/XTi GSM Module V4 Installation Instructions Note: At least one sensor must be learned into the panel to complete the new subscriber

Pagina 3 - Power up

2 Simon XT/XTi GSM Module V4 Installation Instructions Installation Installation consists of inserting the module into the panel, attaching the ant

Pagina 4 - L1 L2 L3 L4

Simon XT/XTi GSM Module V4 Installation Instructions 3 Make sure the module is BELOW the two corner tabs. 4. Insert the module by angling the end

Pagina 5

4 Simon XT/XTi GSM Module V4 Installation Instructions Interactive Services menus on the XT and XTi panels. On Simon XT 1.3 & up panels equipp

Pagina 6 - Interactive menus

Simon XT/XTi GSM Module V4 Installation Instructions 5 Table 4: Errors flashed on L1 (red) Number of flashes Error and solution 1 Module cannot com

Pagina 7

6 Simon XT/XTi GSM Module V4 Installation Instructions LED L5 (yellow) L5 indicates Z-Wave errors. See Table 5 on page 5 for more details. LED pat

Pagina 8

Simon XT/XTi GSM Module V4 Installation Instructions 7 create or troubleshoot an Alarm.com account. --- SIM card SIM card number. Sometimes needed

Pagina 9

8 Simon XT/XTi GSM Module V4 Installation Instructions the panel in high-speed communication mode with the touch screen. ---- Remove From 2WTTS To

Pagina 10 - Regulatory information

Simon XT/XTi GSM Module V4 Installation Instructions 9 Alarm.com for use on the Image Sensor Installer Test Site. (www.alarm.com/imagesetup). ---Cr

Comentarios a estos manuales

Sin comentarios

Interlogix Simon XTi GSM Module V4 Manual de usuario

Busca en linea o descarga Manual de usuario para Accesorios de comunicación Interlogix Simon XTi GSM Module V4. Interlogix Simon XTi GSM Module V4 User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios de comunicación Interlogix Simon XTi GSM Module V4